Critically phase-matched Ti:sapphire-laserpumped deep-infrared femtosecond optical parametric oscillator based on CdSiP2

We report a high-repetition-rate femtosecond optical parametric oscillator (OPO) for the deep-infrared (deep-IR) based on type-I critical phase-matching in CdSiP2 (CSP), pumped directly by a Ti:sapphire laser. Using angle-tuning in the CSP crystal, the OPO can be continuously tuned across 7306–8329 nm (1201–1369  cm−1) in the deep-IR. It delivers up to 18 mW of idler average power at 7306 nm and >7  mW beyond 8000 nm at 80.5 MHz repetition rate, with the spectra exhibiting bandwidths of >150  nm across the tuning range. Moreover, the signal is tunable across 1128–1150 nm in the near-infrared, providing up to 35 mW of average power in ∼266  fs pulses at 1150 nm. Both beams exhibit single-peak Gaussian distribution in TEM00 spatial profile. With an equivalent spectral brightness of ∼5.6×1020photons s−1 mm−2 sr−10.1% BW−1, this OPO represents a viable alternative to synchrotron and supercontinuum sources for deep-IR applications in spectroscopy, metrology, and medical diagnostics.Peer ReviewedPostprint (author's final draft

Femtosecond deep-infrared optical parametric oscillator pumped directly by a Ti:sapphire laser

We report a high-repetition-rate femtosecond optical parametric oscillator (OPO) for the deep-infrared (deep-IR) based on the nonlinear optical crystal, CdSiP2 (CSP), pumped directly by a Ti:sapphire laser, for the first time. By pumping CSP at <1 μm, we have achieved practical output powers at the longest wavelengths generated by any Ti:sapphire-pumped OPO. Using a combination of pump wavelength tuning, type-I critical phase-matching, and cavity delay tuning, we have generated continuously tunable radiation across 6654−8373 nm (1194−1503 cm-1) at 80.5 MHz repetition rate, providing up to 20 mW of average power at 7314 nm and <7 mW beyond 8000 nm, with idler spectra exhibiting bandwidths of 140−180 nm across the tuning range. Moreover, the near-IR signal is tunable across 1127−1192 nm, providing up to 37 mW of average power at 1150 nm. Signal pulses, characterised using intensity autocorrelation, have durations of ∼260–320 fs, with corresponding time-bandwidth product of ∆υ∆τ∼1. The idler and signal output exhibit a TEM00 spatial profile with single-peak Gaussian distribution. With an equivalent spectral brightness of ∼6.68×1020 photons s-1 mm-2 sr-1 0.1% BW-1, this OPO represents a viable table-top alternative to synchrotron and supercontinuum sources for deep-IR applications in spectroscopy, metrology and medical diagnostics.Peer ReviewedPostprint (author's final draft

Elementary analysis of the special relativistic combination of velocities, Wigner rotation, and Thomas precession

The purpose of this paper is to provide an elementary introduction to the qualitative and quantitative results of velocity combination in special relativity, including the Wigner rotation and Thomas precession. We utilize only the most familiar tools of special relativity, in arguments presented at three differing levels: (1) utterly elementary, which will suit a first course in relativity; (2) intermediate, to suit a second course; and (3) advanced, to suit higher level students. We then give a summary of useful results, and suggest further reading in this often obscure field.Comment: V1: 25 pages, 6 figures; V2: 22 pages, 5 figures. The revised version is shortened and the arguments streamlined. Minor changes in notation and figures. This version matches the published versio

First principles calculation of uniaxial magnetic anisotropy and magnetostriction in strained CMR films

We performed first - principles relativistic full-potential linearized augmented plane wave calculations for strained tetragonal ferromagnetic La(Ba)MnO$_3$ with an assumed experimental structure of thin strained tetragonal La$_{0.67}$Ca$_{0.33}$MnO$_3$ (LCMO) films grown on SrTiO$_3$[001] and LaAlO$_3$[001] substrates. The calculated uniaxial magnetic anisotropy energy (MAE) values, are in good quantitative agreement with experiment for LCMO films on SrTiO$_3$ substrate. We also analyze the applicability of linear magnetoelastic theory for describing the stain dependence of MAE, and estimate magnetostriction coefficient $\lambda_{001}$.Comment: Talk given at APS99 Meeting, Atlanta, 199

Fluoride-containing bioactive glasses: Effect of glass design and structure on degradation, pH and apatite formation in simulated body fluid

NOTICE: this is the author’s version of a work that was accepted for publication in Acta Biomaterialia. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Acta Biomaterialia, [VOL 6, ISSUE 8, (2010)] DOI: 10.1016/j.actbio.2010.01.04

An exact quantification of backreaction in relativistic cosmology

An important open question in cosmology is the degree to which the Friedmann-Lemaitre-Robertson-Walker (FLRW) solutions of Einstein's equations are able to model the large-scale behaviour of the locally inhomogeneous observable universe. We investigate this problem by considering a range of exact n-body solutions of Einstein's constraint equations. These solutions contain discrete masses, and so allow arbitrarily large density contrasts to be modelled. We restrict our study to regularly arranged distributions of masses in topological 3-spheres. This has the benefit of allowing straightforward comparisons to be made with FLRW solutions, as both spacetimes admit a discrete group of symmetries. It also provides a time-symmetric hypersurface at the moment of maximum expansion that allows the constraint equations to be solved exactly. We find that when all the mass in the universe is condensed into a small number of objects (<10) then the amount of backreaction in dust models can be large, with O(1) deviations from the predictions of the corresponding FLRW solutions. When the number of masses is large (>100), however, then our measures of backreaction become small (<1%). This result does not rely on any averaging procedures, which are notoriously hard to define uniquely in general relativity, and so provides (to the best of our knowledge) the first exact and unambiguous demonstration of backreaction in general relativistic cosmological modelling. Discrete models such as these can therefore be used as laboratories to test ideas about backreaction that could be applied in more complicated and realistic settings.Comment: 13 pages, 9 figures. Corrections made to Tables IV and

Charm and Bottom Semileptonic Decays

We review the present status of theoretical attempts to calculate the semileptonic charm and bottom decays and then present a calculation of these decays in the light--front frame at the kinematic point $q^2=0$. This allows us to evaluate the form factors at the same value of $q^2$, even though the allowed kinematic ranges for charm and bottom decays are very different. Also, at this kinematic point the decay is given in terms of only one form factor $A_{0}(0)$. For the ratio of the decay rates given by the E653 collaboration we show that the determination of the ratio of the Cabibbo--Kobayashi--Maskawa (CKM) matrix elements is consistent with that obtained from the unitarity constraint. At present, though, the unitarity method still has greater accuracy. Since comparisons of the semileptonic decays into $\rho$ and either electrons or muons will be available soon from the E791 Fermilab experiment, we also look at the massive muon case. We show that for a range of $q^2$ the $SU(3)_F$ symmetry breaking is small even though the contributions of the various helicity amplitudes becomes more complicated. For $B$ decays, the decay $B \rightarrow K^{*} \ell \bar{\ell}$ at $q^2=0$ involves an extra form factor coming from the photon contribution and so is not amenable to the same kind of analysis, leaving only the decay $B \rightarrow K^{*}\nu \bar{\nu}$ as a possibility. As the mass of the decaying particle increases we note that the $SU(3)$ symmetry becomes badly broken at $q^2=0$.Comment: Latex, 19 pages, two figures are attached, a minor change in the manuscript related to thi

Preparation and Use of a General Solid-Phase Intermediate to Biomimetic Scaffolds and Peptide Condensations

The Distributed Drug Discovery (D3) program develops simple, powerful, and reproducible procedures to enable the distributed synthesis of large numbers of potential drugs for neglected diseases. The synthetic protocols are solid-phase based and inspired by published work. One promising article reported that many biomimetic molecules based on diverse scaffolds with three or more sites of variable substitution can be synthesized in one or two steps from a common key aldehyde intermediate. This intermediate was prepared by the ozonolysis of a precursor functionalized at two variable sites, restricting their presence in the subsequently formed scaffolds to ozone compatible functional groups. To broaden the scope of the groups available at one of these variable sites, we developed a synthetic route to an alternative, orthogonally protected key intermediate that allows the incorporation of ozone sensitive groups after the ozonolysis step. The utility of this orthogonally protected intermediate is demonstrated in the synthesis of several representative biomimetic scaffolds containing ozonolytically labile functional groups. It is compatible with traditional Fmoc peptide chemistry, permitting it to incorporate peptide fragments for use in fragment condensations with peptides containing cysteine at the N-terminus. Overall yields for its synthesis and utilization (as many as 13 steps) indicate good conversions at each step